Asbestos, fire, legionella, electrical and gas. All under one roof.
Whether you’re preparing a site for refurbishment, completing a development or managing properties post-handover, these inspections are legally required, and the last thing you need is a different contractor for each one.
We handle all of them. One team, one point of contact, fast turnarounds, so you can get on with the project.
Any building constructed before 2000 is likely to contain asbestos. Under the Control of Asbestos Regulations 2012, you need a survey before any refurbishment or demolition work starts.
We carry out asbestos management and refurbishment surveys, identify any asbestos-containing materials and give you a clear, legally compliant record.
Stagnant water, infrequently used outlets and poorly maintained systems are all it takes for Legionella risk to build up. Under the Health and Safety at Work Act 1974 and COSHH Regulations, managing that risk is your legal responsibility.
We assess your setup, tell you exactly what needs addressing and give you the documentation to prove you’re on top of it.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person for any non-domestic premises must ensure a suitable and sufficient fire risk assessment is in place.
We carry out the full assessment, document the findings clearly and give you a prioritised action plan.
If your property has gas appliances, an annual gas safety check is a legal requirement under the Gas Safety (Installation and Use) Regulations 1998. Only Gas Safe registered engineers can carry it out and issue the certificate. Non-compliance isn’t a fine but a criminal offence.
We carry out the full check, issue the CP12 and keep you on track for your annual renewal so you have one less thing to coordinate across your properties.
For residential landlords, an EICR is a statutory requirement every five years under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020. For commercial properties, it’s the accepted method of demonstrating compliance under the Electricity at Work Regulations 1989.
Either way, it needs doing. We carry out the full inspection, flag anything that needs attention and get the report back to you fast so it doesn’t hold up your project or handover.
Compliance across multiple regulatory areas is complex by nature. But the real problem most developers and architects face isn’t the regulations themselves, it’s managing five different suppliers to meet them.
At The Compliance Company, we cover all of it. One company, one point of contact, everything handled for you.
The earlier compliance is considered, the fewer problems you’ll face later. We work with architects and developers at the design stage to make sure your project is built on solid regulatory ground from day one. We cover SAP & SBEM Calculations (Part L), Overheating Assessments (Part O), Water Efficiency Calculations (Part G), and Bespoke PSI Values.
Keep your project moving with no delays, no last-minute scrambles. We do on-site testing scheduled around your build, and coordinate everything so you hit your completion targets without compliance becoming a bottleneck. We cover Air Pressure / Air Permeability Testing (Part L), Acoustic Testing (Part E), Ventilation Flow Rate Testing (Part F), and EPC Certification.
The UK’s only dedicated compliance consultancy focused entirely on supported housing compliance.
We work exclusively with supported housing providers, care organisations and nominated individuals to manage risk, maintain safe environments and meet the standards this specialised sector demands.
Compliance in supported housing is a different beast.
It has stricter frameworks, sector-specific requirements and a very different set of responsibilities.
We have a specialist division built entirely for it. Same one-stop-shop approach, built specifically for housing providers, care organisations and nominated individuals managing property compliance.
